Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It's subtle, doesn't have LED indications or key fobs and is concealed within the vehicle's wiring.
The user can also disable the system temporarily by using Transport Mode when renting their car. This guide will guide you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from hacking, key cloning and relay attacks. The system connects directly to your vehicle's ECU and is protected by a unique pin code of your choice. It's inaccessible to thieves using diagnostic scanners or other modern methods, and it is unable to be disabled by circuit cuts.
The system is easy to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's protection package.
First, the installer needs to disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer can safely begin working. Hand tools are the most basic to be used to make precise connections. A multimeter is a great tool to check electrical values. Insulation tape and cable tie are essential to protect connections and keep wiring neat. In addition, the user's manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
It is important to choose an area for grounding that is free of paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H and the CAN L are connected to the correct ECU ports. These wires can be plugged into or soldered depending on the model. To ensure a stable and durable connection, it is recommended that you use a high-quality plug.
Transport Mode can be turned on by the customer after the installation is completed. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. To do this, the user must press the service button on the dashboard five times in the space of two seconds. After this is done the system will verify with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great choice for anyone who frequently rents out their vehicles on platforms such as Turo. Immobilisers can lower the cost of insurance, as it lowers the chance of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser in order to guard your vehicle from theft. It protects your vehicle from starting even if a criminal steals or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the right PIN code is entered.
The device connects to the vehicle's bus network, CAN and allows direct communication with the ECU. It makes use of buttons already on the dashboard and wheel to create a unique sequence only you can identify, making it impossible for someone else to start your car. This is the ultimate security system to protect your pride and joy and preserve its value when you want to sell it in the future.
Installing a ghost ignition is a simple process, but it is important to follow the instructions carefully to avoid electrical issues and system malfunctions. First, you must find a 12V power source and a solid grounding on the chassis of your car. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Also, make sure to protect the connections by insulating them with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires have been connected, you are able to connect the battery and start the engine to test whether the immobiliser works. After you've verified that everything is functioning properly then you can put the immobiliser in a safe position inside the vehicle. Be sure to cover it properly to stop any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it is in compliance with the highest standards of security and is an excellent protection against car thieves. It is impervious to hacking and key cloning and is not able to be disabled without the code. It is also simple to use and can be set into the service valet mode to ensure that your car is not activated when you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's specifically designed to deter theft of vehicles. ghost 2 immobiliser review with your vehicle's ECU and connects directly to its CAN bus. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings for your vehicle.
It's also undetectable to thieves using diagnostic scanners. This is because the system does not transmit and receive radio frequency signals, and it utilizes the CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you have entered the correct code. After this, you can start your vehicle and drive off safely.
Once installed, the Ghost Immobiliser safeguards your vehicle against key cloning or hacking while protecting its value. If you ever have to surrender your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need identify a source of constant power (12V) and a grounding point. Make sure that both are well-insulated and able to be touched. Cable ties are also recommended for bundling and secure the wires. ghost 2 immobiliser cost reduces the possibility of theft by thieves. Be sure to check the exact locations of these points to avoid mistakes and mark them with an adhesive or label. Verify every connection for signs that they are wearing out. Loose connections can lead to problems with the system, so be sure they're securely in place and properly insulated. Finally, don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is working correctly and that all connections and insulation are safe. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to prevent unauthorised motor starting. The innovative technology protects your vehicle against hacking and key cloning as well as other methods used by thieves to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to give the most complete protection for your vehicle. The Ghost's unmatched features, coupled with its subtle design makes it a preferred option for both drivers who love cars and security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it's important to follow all steps of the installation process. Consult the wiring diagram of the vehicle to help you locate and connect the wires. You'll need to determine the grounding and power sources. Once you've found them, you will be required to mark the points so that they are easy to identify during installation. It is essential to use top-quality materials and tools. Hand tools are a must in making connections that are precise, while a multimeter will check electrical values and ensure safety. Insulation tape and cable ties will keep the connections neat and tidy. Also, a user's guide will provide specific instructions tailored to your Ghost model.
Before beginning the installation it is essential to test the system by entering the PIN code and then starting the vehicle. This step will confirm the immobiliser functions as intended and prevent unauthorised vehicle starts. It's recommended to perform this procedure regularly as part of your routine vehicle inspections to ensure that the system is working correctly.
After the installation is completed, you can start driving your vehicle with confidence. The Ghost will guard your car from would-be car thieves. It will ensure that no one will drive away with your vehicle even if they don't have the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to identify any attempts at tampering or theft and allow you to track your vehicle if it's stolen.
The Ghost is compatible with a range of vehicles, including those made by most major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines for installing our products. This guarantees customers, insurance companies, and law enforcement agencies that all installations are performed safely and properly.